5G TUBE
5G / LTECompact outdoor cellular CPE
Model: OWX-5G-I4O10-E10
TECH SPECSAcheter
Chargement du prix et du stock…
Overview
| Product type | Outdoor 5G / LTE CPE |
|---|---|
| Mobile networks | 5G Sub-6 GHz · 4G LTE |
| 5G SA maximum rate | 2 Gbps downlink · 1 Gbps uplink |
| 5G NSA maximum rate | 2.6 Gbps downlink · 650 Mbps uplink |
| LTE maximum rate | 600 Mbps downlink · 150 Mbps uplink |
| Antenna gain | Up to 10 dBi |
| Ethernet | 1× GbE RJ45 · Auto MDI / MDIX |
| SIM | 1 Micro SIM slot |
| Weather protection | IP65 |
| Model | OWX-5G-I4O10-E10 |
Cellular & Antenna
| Cellular standard | 3GPP Release 15 |
|---|---|
| LTE category | Cat 12 downlink · Cat 13 uplink |
| Antenna frequency | 698–3,800 MHz |
| 5G NSA bands | n1 / n3 / n7 / n38 / n40 / n41 / n77 / n78 / n79 |
| 5G SA bands | n1 / n3 / n5 / n7 / n8 / n20 / n28 / n38 / n40 / n41 / n71 / n77 / n78 / n79 |
| 5G downlink MIMO | 4×4 on n1 / n3 / n7 / n38 / n40 / n41 / n77 / n78 / n79; 2×2 on n5 / n8 / n20 / n28 / n71 |
| 5G uplink MIMO | 2×2 on n38 / n40 / n41 / n77 / n78 / n79 |
| LTE FDD bands | B1 / B2 / B3 / B4 / B5 / B7 / B8 / B20 / B28A / B28B / B66 |
| LTE TDD bands | B38 / B40 / B41 |
| LTE MIMO | 2×2 downlink |
Hardware
| Processor | UNISOC IVY510 · Dual Cortex-A55 at 1.35 GHz |
|---|---|
| USB | Type-C management interface |
| Built-in WiFi | None; connect an external indoor router |
| RAM | 4 Gbit DDR3 |
| Flash | 2 Gbit |
| Power | 802.3af/at PoE or 24–48 V passive PoE |
| Dimensions | 184 × 225 mm |
| Weight | 0.8 kg |
| Operating temperature | −20 to +50 °C |
| Storage temperature | −20 to +70 °C |
| Operating humidity | 5–95%, non-condensing |
Networking & Management
| Network modes | Dynamic IP · Static IP · PPPoE |
|---|---|
| DHCP | Supported |
| APN configuration | Automatic and manual |
| Band / PCI lock | Supported |
| SMS / AT commands | Supported |
| VPN client | PPTP · L2TP |
| Network controls | Port mapping · MAC / IP filtering · DDNS |
| Management | Web interface · SNMPv1/v2 · TR-069 |
| Maintenance | Configuration backup · Firmware upgrade · Reboot · Reset |
Cellular rates are theoretical maxima. Actual performance depends on network coverage, operator configuration, antenna alignment and installation conditions. Band availability depends on the installed cellular module and region.
STANDARD PACKAGE
In the box
Supplied components for 5G TUBE.
5G TUBE radio×1
Ball joint mount×1
Metal strap×1
24 V PoE adapter×1
Quick Setup Guide×1
PRODUCT PHOTOGRAPHY
5G TUBE, in detail.
Explore the original product views.
INSTALLATION ESSENTIALS
Complete the installation.
Connection and mounting requirements for 5G TUBE.
Mobile service
An active SIM and a compatible LTE / 5G data plan.
Check your deployment configurationMounting support
Use suitable outdoor mounting hardware for the deployment.
Check your deployment configurationPower input
802.3af/at PoE or 24–48 V passive PoE
Check your deployment configurationINSTALLATION NOTES
Install. Connect. Configure.
Deployment checklist for 5G TUBE.
Prepare the SIM
With power disconnected, insert an active SIM for a compatible mobile network.
Mount the CPE
Secure the unit with the appropriate mounting hardware. Optimize its location for cellular reception.
Connect power and Ethernet
Connect the documented PoE supply and Ethernet network. Seal the outdoor cable entry.
Configure cellular access
Set the operator APN as required and verify network registration, signal quality and data connectivity.
5G TUBE
