APEX E6
WiFi 7Centrally managed enterprise access
TECH SPECSAcheter
Chargement du prix et du stock…
Overview
| Device type | Enterprise ceiling access point |
|---|---|
| Wireless technology | WiFi 7 |
| Radio configuration | 2.4 / 5 / 5 GHz |
| Maximum radio rates | 688 + 2,882 + 2,882 Mbps |
| Spatial Diversity | 2x2 MIMO per radio · 6 streams |
| Network interfaces | 2.5 GbE + 10G SFP+ |
Radio & Antenna
| Antenna configuration | 6 integrated antennas |
|---|---|
| MLO | Supported |
| Operating frequency | 2.400–2.484 GHz · 5.150–5.850 GHz |
| Antenna gain | 1.7 dBi at 2.4 GHz · 4 dBi at 5 GHz |
| 5 GHz channel width | Up to 160 MHz |
| Modulation | 4096-QAM |
Hardware
| Dimensions | 208 × 208 × 46 mm |
|---|---|
| Weight | 0.55 kg |
| Operating temperature | −10 to +55°C |
| Power | 802.3at PoE · 12 V DC / 2 A · 48 V / 0.5 A terminal block |
| Maximum consumption | <24 W |
| Network features | Multi-SSID / VLAN / Client isolation |
| Processor | Qualcomm IPQ5322 + QCN6274 + QCA8081 |
| RAM | 512 MB DDR4 |
| Flash | 128 MB |
| Console | 1 console interface |
| Operating humidity | 5–95%, non-condensing |
| ESD protection | ±8 kV air · ±6 kV contact |
| Surge protection | 2 kV common mode · 1 kV differential mode |
Networking & Management
| Roaming | 802.11k/v |
|---|---|
| Management | Web / AC controller / Remote / Cloud |
| Operating modes | Gateway · AP · Repeater |
| Wireless security | WPA / WPA2-PSK · WPA3-PSK |
| VLAN | Supported |
| Client isolation | Supported |
PHY rates are theoretical. Actual throughput and range depend on radio configuration and operating conditions. Available frequencies, channel widths and transmit power depend on the country of operation.
STANDARD PACKAGE
In the box
Supplied components for APEX E6.
APEX E6 access point×1
LAN cable×1
Mounting accessoriesSet
PRODUCT PHOTOGRAPHY
APEX E6, in detail.
Explore the original product views.
INSTALLATION ESSENTIALS
Complete the installation.
Connection and mounting requirements for APEX E6.
Installation support
Ceiling mounting hardware.
Check your deployment configurationNetwork connection
2.5 GbE + 10G SFP+
Check your deployment configurationPower supply
802.3at PoE · 12 V DC / 2 A · 48 V / 0.5 A terminal block
Check your deployment configurationINSTALLATION NOTES
Install. Connect. Configure.
Deployment checklist for APEX E6.
Position the device
Fix the access point to the ceiling with its mounting accessories.
Prepare the antennas
Keep the antenna coverage area clear of obstructions.
Connect network and power
Use the documented Ethernet and power interfaces. Verify the supply requirements on the device label.
Configure wireless access
Configure the country, SSIDs, authentication and VLAN settings. Verify coverage with a client device.
APEX E6
