PANEL X25
WiFi 6High-capacity 4x4 connectivity
TECH SPECSAcheter
Chargement du prix et du stock…
Overview
| Primary application | High-capacity PtP backhaul |
|---|---|
| Wireless technology | WiFi 6 |
| Spatial Diversity | 4x4 MIMO |
| Throughput | 3.6 Gbps+ |
| Link distance | 8 km+ |
| Network interfaces | 2.5 GbE + GbE |
| Weather protection | IP67 |
Radio & Antenna
| Antenna | 25 dBi panel |
|---|---|
| Operating frequency | 5.1–5.9 GHz; country dependent |
| Channel width | 20 / 40 / 80 / 160 MHz |
| Maximum transmit power | 30 dBm |
| Polarization | Linear |
| Antenna beamwidth | 11° horizontal · 11° vertical |
Hardware
| Maximum PHY rate | 4.804 Gbps |
|---|---|
| Operating temperature | −30 to +55°C |
| Weight | 3 kg |
| Dimensions | 400 × 300 × 45 mm (without bracket) |
| Power | 24–48 V passive PoE / DC 12–48 V |
| Maximum consumption | <18 W |
| Processor | Qualcomm IPQ5018 |
| Surge suppression | 8 kV |
| Mounting | Pole · 40–80 mm diameter |
Networking & Management
| Wireless operating modes | AP WDS · Client WDS |
|---|---|
| Wireless security | WPA-PSK · WPA2-PSK · WPA/WPA2-PSK (AES / TKIP) |
| VLAN | IEEE 802.1Q |
| DHCP | Server · Client |
| Management | SNMP · TR-069 |
PHY rates are theoretical. Actual throughput and range depend on radio configuration and operating conditions. Available frequencies, channel widths and transmit power depend on the country of operation.
STANDARD PACKAGE
In the box
Supplied components for PANEL X25.
PANEL X25 radio×1
Mounting bracket×1
Power cable×1
PoE adapter×1
PRODUCT PHOTOGRAPHY
PANEL X25, in detail.
Explore the original product views.
INSTALLATION ESSENTIALS
Complete the installation.
Connection and mounting requirements for PANEL X25.
Mounting support
Pole · 40–80 mm diameter
Check your deployment configurationOutdoor Ethernet
Use shielded cabling and weather-sealed connections.
Check your deployment configurationPower supply
24–48 V passive PoE / DC 12–48 V
Check your deployment configurationINSTALLATION NOTES
Install. Connect. Configure.
Deployment checklist for PANEL X25.
Mount and align
Choose a mounting position with a clear line of sight. Secure the radio and align the directional antenna with the remote site.
Connect the network
Connect an outdoor-rated shielded Ethernet cable and seal exposed connectors.
Connect power
Use the power method listed in the hardware specifications and verify the device label before energizing.
Configure and verify
Set the country, radio mode, frequency and wireless security. Verify alignment and link performance.
PANEL X25
